Esperanto
Shqiptare
Euskara
Zulu
Latinus
Cymraeg
தமிழ்
Slovak
Slovak
Afrikaans
What should I do if the laser protect lens keeps burning out
Posted on:
2022-07-29
The laser protect lens of the laser cutting machine can actually achieve the effect of reuse. However, if the protection is not good, or the maintenance is improper, it is easy to cause the lens to burn out, crack, or burn out.

In recent years, I have also received feedback from many other users, saying that the laser protect lens purchased by other manufacturers is always burnt out, which is a quality problem and usually does not pay attention to maintenance.
It is also not ruled out that some manufacturers use ordinary or inferior laser protect lenses in the production process. The lens itself is relatively brittle. Some users accidentally touch the lens after receiving the goods, or the goods collide with other items. affect the lens.
How can laser protect lens not be burned out and reused?
Remember to remove dust when the work is completed every day. The dust should be meticulous, and be careful when cleaning, because the lens is afraid of falling and touching. Even if you replace the new lens, you must first remove the dust.
Increase the blowing delay, pay attention to adjusting the focal length when cutting, and the thickness of the sheet to be cut, and the stability of the air pressure all have a certain impact on the lens.
The number of perforations in the corresponding time should be remembered, because the higher the output frequency, the damage to the lens due to the perforation sputtering, so the time should be set before the perforation. Generally, the continuous wave at 500hz will not exceed 150.
The last step of inspection should also be meticulous. Check whether there is oil or water on the laser protect lens every day, because the cutting machine will generate gas when it is working every day. This gas is neither oxygen nor nitrogen, but the gas generated in the air. The outgoing gas is to blow away the residue generated during the cutting process, and the second is to prevent the residue from entering the lens, which is also a good protection for the lens.
While checking the lens, don't forget to check whether the air compressor dryer is working properly every day.
Only by doing this, your laser protect lens can be reused for a long time, and it also avoids the phenomenon of being frequently burned out.
Related Info
