Esperanto
Shqiptare
Euskara
Zulu
Latinus
Cymraeg
தமிழ்
Slovak
Slovak
Afrikaans
Cleaning and storage of green laser optics lens products
Posted on:
2022-06-24
Steps to clean green laser optics lens products
1. Different green laser optics lens products have different cleaning methods. When the mirror surface is flat and has no lens holder, use lens tissue to clean, for example, to clean the protective mirror; when the mirror surface is curved or with a mirror holder, use a cotton swab to clean. For example, the specific steps for cleaning the focusing lens are as follows:
2. The steps of cleaning green laser optics lens products with lens paper: blow off the dust on the surface of the lens with a blower; clean the surface of the lens with alcohol or lens paper, the lens paper should be placed flat on the surface of the lens, and drip 2~3 Drop high-purity alcohol or high-purity acetone, slowly pull out the lens paper horizontally toward the operator, and repeat the above operations several times until the mirror surface is clean; Repeat the above steps until the mirror surface is clean. It is forbidden to drag directly on the mirror surface with dry lens paper.
3. The steps of cleaning green laser optics lens products with cotton swabs: first blow off the dust on the mirror surface with a spray gun; then use a clean cotton swab to remove the dirt; use a new cotton swab dipped in high-purity alcohol or acetone to move in a circular motion from the center of the lens , scrub the lens, after each week, change another clean cotton swab, repeat the above operation until the lens is clean; clean the lens with a clean cloth, remove the residue on the mirror surface, be careful not to scratch the mirror surface; put the cleaned lens Take it to a place with sufficient light for observation. If the reflection of the lens is good, it means that the lens has been cleaned. If the reflection of the lens is not good, continue to clean the lens; The lens is placed on the lens holder. Do not use used cotton swabs for operation.
Storage of green laser optics lens products
1. Green laser optics lens products are properly stored to keep the quality of the lenses intact.
2. The storage environment temperature is 10-30℃. Do not put the lens in a freezer or similar environment. Otherwise, it will freeze and frost when taking it out, which will easily damage the lens. The storage environment temperature should not be higher than 30℃, otherwise the coating on the lens surface will be affected.
3. Store the green laser optics lens products in the box, and the lens should be placed in a non-vibrating environment, otherwise it will easily cause the deformation of the lens, thus affecting the performance of the lens.
Related Info
ADD: No. 521, Zhujiang Road, Huqiu District, Suzhou City, Jiangsu Province, China
Follow us