Esperanto
Shqiptare
Euskara
Zulu
Latinus
Cymraeg
தமிழ்
Slovak
Slovak
Afrikaans
Cleaning and maintenance of fiber laser lens
Posted on:
2021-05-07
It is inevitable that the fiber laser lens will be exposed to some pollution during the working process, such as water pollution or dust pollution, etc., so the fiber laser lens needs to be cleaned during the daily maintenance process to ensure the stability of the fiber laser lens. Of course, cleaning lenses is not the same as cleaning spectacle lenses in our lives. Special attention is needed. This article explains the correct cleaning method for fiber laser lens. In the process of cleaning the lens, the only purpose is to remove the contaminants of the lens, and not to cause further pollution and damage to the lens.
During the installation and cleaning of the fiber laser lens, any sticky matter, or even oil droplets printed on the fingernails, will increase the absorption rate of the lens and reduce the service life. Therefore, the following precautions must be taken:
1. Never install the fiber laser lens with bare fingers. Wear finger cots or rubber gloves.
2. Do not use sharp instruments to avoid scratches on the surface of the fiber laser lens.
3. When taking the fiber laser lens, do not touch the film, but hold the edge of the lens.
4. The fiber laser lens should be placed in a dry and clean place for inspection and cleaning. A good workbench should have several layers of cleaning paper towels and several sheets of lens cleaning tissue on the surface.
5. The user should avoid talking above the fiber laser lens, and keep food, beverages and other potential contaminants away from the work environment.
Related Info
ADD: No. 521, Zhujiang Road, Huqiu District, Suzhou City, Jiangsu Province, China
Follow us